Store-bought drain cleaners dissolve soap and light grease. They do nothing for root intrusion, grease buildup 40 feet in, or a collapsed pipe segment. Masters Plumbing Service's Drain Cleaning team in Lancing arrives with professional-grade augers and hydro-jetting units that actually resolve the blockage.
📞 Call +1-855-718-1500 — Book Today
Retail drain products and inexperienced plumbers share one problem: they treat the symptom, not the cause. Our approach combines the right equipment with the right diagnostic process.
Our truck-mounted hydro-jetting units propel water at up to 4,000 PSI through a rotating nozzle that scours pipe walls clean — removing grease buildup, scale, and soft root intrusions in a single pass. Unlike augers, jetting leaves the pipe interior clean rather than just piercing a hole through the clog.
Before recommending any clearing method, we run a push-rod camera into the drain to visually confirm blockage type and location. Grease accumulation 30 feet in looks different from a root ball at a joint or a collapsed section — and each requires a different response.
We clear kitchen drains, bathroom sink and shower drains, floor drains, laundry drains, and main sewer lines. Our equipment scales from a 1/2" kitchen drain line to a 6" commercial main — same certified technician, same professional-grade tools.
Our written service report notes the blockage type, location, method used, and any structural observations from the camera run. You walk away knowing the state of your drain system, not just that the water is flowing again.
From a slow bathroom sink to a full main-line stoppage affecting every fixture in the house, our drain techs in Lancing, TN have the equipment and training to clear it.
Grease blockages in kitchen drain lines often occur 10–40 feet from the drain opening, past the p-trap, where the line cools and FOG solidifies. Our jetting equipment reaches and clears these deposits where a plunger or retail product cannot.
Chronic slow bathroom drains often point to a partially closed p-trap, a buildup on the overflow plate mechanism, or a drain arm pitched incorrectly. We clear the immediate clog and identify if a mechanical fix is needed to prevent fast recurrence.
Root intrusion at pipe joints is the leading cause of main sewer blockages in homes over 20 years old. Our electric root cutter attachment on the sectional cable removes the root mass; we then scope again to confirm the line is clear before pulling equipment.
Basement floor drains and laundry room drains often go years without cleaning and can develop sediment, lint, and mineral scale blockages. We clear these drains with an electric snake and flush thoroughly to confirm full flow before closing out the job.
Restaurants, multi-family buildings, and homes with chronic grease or root problems benefit from scheduled hydro-jet maintenance on a 12–24 month cycle. We map the drain system, document baseline camera footage, jet the lines, and re-scope to confirm clean pipe walls. This approach prevents emergency backups rather than reacting to them.
Sometimes the question isn't just "why is this draining slowly" but "what is the actual condition of this pipe system." We run a recorded CCTV inspection with distance markings and provide a written report noting blockage types, root intrusion points, joint offsets, pipe material, and any visible structural defects.
We don't show up and start snaking blind. Our approach uses a camera-first diagnostic protocol to confirm what we're clearing before selecting the method.
Tell our dispatcher which fixtures are affected — one slow drain vs. multiple backed-up fixtures tells us whether we're likely dealing with a localized clog or a main line blockage. We schedule same-day when slots are available.
The camera also gives us the distance to the blockage and confirms the pipe diameter — both factors in selecting the right clearing method and nozzle size.
Based on the camera findings, we present you with a flat-rate quote and explain exactly which method we're using — electric auger, hydro-jet, root cutter — and why. No work begins until you approve.
After clearing, we run the camera a second time to confirm the pipe is open to full diameter. You see the before-and-after footage. We provide a written service summary and our drain clearing warranty.

Called about a kitchen drain that three other plumbers had snaked without long-term success. Masters Plumbing Service ran a camera first and found grease buildup 28 feet in, past where any hand snake reaches. Hydro-jetted it, re-scoped to confirm clean, and the drain has run perfectly in the months since.
Main line backed up completely on a Sunday. Found Masters Plumbing Service and they came within 2 hours. Camera found a 3-inch grease plug combined with roots at a joint. Cleared both with cable and jetter, sent me the scope video via email. Super transparent process.
We own a rental property and schedule annual hydro-jet maintenance with Masters Plumbing Service. The jetting intervals have gotten the drain-related tenant calls down to nearly zero. The camera documentation each year also gives us a clear record of pipe condition over time.

Our drain technicians are based in and around Lancing to keep drive times short and same-day slots realistic. We cover residential and commercial properties across Lancing, TN.

Masters Plumbing Service's certified drain team is in Lancing today. Call now to check same-day availability.
📞 Call +1-855-718-1500 Now